Storage tank double-walled (5.000 ltr.) Lubricating Oil Variant A

Storage tank double-walled (5.000 ltr.) Lubricating Oil Variant A

SKU: KTD-F-A-5-A-LO
Category: KTD-F
Manufacturers: Krampitz Maschinentank GmbH

KTD-F-A-5-A-LO
Storage tank double-walled, A (outdoor installation), 5 (5.000 ltr.), A (no coating inside)

- Material: mild steel S 235 JR
- double-walled, robust, cubic shape
- General Design Certificate: Z-38.12-312
- Volumen 100%: appr. 5.380 ltr.
- Volumen 95%: appr. 5.140 ltr.

Dimensions appr.:

- Length: 2.000 mm
- Width: 1.500 mm
- Overall width: 1.720 mm
- Height: 2.000 mm
- Overall height: 2.400 mm
- Weight: 1.360 kg

Prices visible after login

Production time: 8 weeks
Production time: 20 - 80 Workdays (DE - int. shipments may differ)

Configure

Coating (inside) in m²

Please select only one component.

The antistatic inner coating is a corrosion protection for resistance to stress caused by media such as kerosene or other fuels with a low discharge capacity and a tendency to static charging.

without inside coating: raw oiled inside

Item details

Quantity: 1

1 m² Coating inside - bottom tray - for oily mediums

1 m² Coating inside - bottom tray - for oily mediums: Corrosion protection for resistance to exposure to oily, non-aggressive media such as lubricating oil, heating oil, diesel, biodiesel, gasoline or cooling/lubricating water, which do not tend to become statically charged.

- Coating area: floor and 300 mm of the side walls
- Corrosion protection of the remaining surfaces such as roof and top of side walls by spraying with diesel oil
Surface preparation floor and side walls from the bottom 300 mm upwards
- Sandblasting Grit (Sa 2.5; Rz 50-65)
- 2K ceramic composite coating
surface preparation roof and side walls from 300 mm upwards
- clean
- oiling of all surfaces

Item details

Quantity: 6

1 m² Coating - inside the tank - for oily mediums

1 m² Coating - inside the tank - for oily mediums: Corrosion protection for resistance when exposed to oily, non-aggressive media such as lubricating oil, heating oil, diesel, biodiesel, gasoline or cooling/lubricating water, which do not tend to build up static charge

Surface preparation:
- Sandblasting Grit (Sa 2.5; Rz 50-65).
Coating:
- 2K ceramic composite coating

Item details

Quantity: 20

Sensors: overfill protection

Please select at least 1 item.

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

Limiting value sensor Type GWG 12-K1 Indoor incl. reducer...

Limiting value sensor Type GWG 12-K1 Indoor incl. reducer 2": - only for diesel / heating oil with CE-mark
- with 1,5 m cable
- Reduction 2" x 1" (AG/IG)
- Mandatory for tanks with a volume of 1000 litres or more

Item details

Quantity: 1

Level Limiter Type: NB 220 H: Level Limiter Type: NB 220 H

- with potential free changer
- Supply: 230 V, 50 Hz
- not to be mounted directly on the tank for media such as kerosene or bioethanol

Item details

Quantity: 1

Overfill prevention Type 76 A, 200 mm, diesel, heating oil

Overfill prevention Type 76 A, 200 mm, diesel, heating oil: - Probe length 200 mm
- Diameter: 16 mm
- Connection: G 3/4" AG

Item details

Quantity: 1

Pumps

optional

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

Centrifugal pump type PK-80-016 400 V: - medium: D / HEL
- flow rate:
   - min: 11 ltr./min. at 30 mWs delivery height
   - max: 43 ltr./min at 5 mWs delivery height
- suction height: up to 9 m
- voltage: 400 V
- current: 2,0 A
- frequency: 50 Hz
- electrical power: 0,6 kW
- connection:
   - 1" on the suction side
   - 1" on the suction side
- protection: IP 44
- class F insulation
- corrosion protection:
   - two-component coating in RAL 7032

Item details

Quantity: 1

Hand wing pump K1 3/4" 17 l/min: - medium: D / HEL
- flow rate:
- max: ca. 17 ltr./min. at 10 m delivery height
- suction height: 4 m
- connection: 3/4" female thread
- Corrosion protection:
- two-component coating in RAL 7032
- incl. wooden lever
- suitable for liquids up to 80 °C

Item details

Quantity: 1

Special options

Please select at least 1 item.

additional equipment

Suction pipe 1" flanged with foot valve: - for tank height up to 2000mm
- flanged
- diameter: 160mm
- 4-hole flange with welded 1" socket
- seal

Item details

Quantity: 1

Suction pipe 2" flanged with foot valve: - foot valve
- flanged
- diameter 160mm
- 4-hole flange with welded bush 2“
- seal
- installed

Item details

Quantity: 1

Filling socket DN 50 45°: - Filling tube closure bayonet closure G2
- father coupling brass
- Cap made of oil and weather resistant plastic
- pressure waterproof up to 10 m water column
- lockable with standard padlock
- incl. green sign "fuel oil EL low sulfur" and red sign "also for fuel oil EL standard
- Angle 2", 45° male thread/male thread

Item details

Quantity: 1

Filling nozzle DN 50 straight: - Filling tube closure bayonet closure K2
-father coupling brass
- Cap made of oil and weather resistant plastic
- pressure waterproof up to 10 m water column
- lockable with standard padlock
- incl. green sign "fuel oil EL low sulfur" and red sign "also for fuel oil EL standard
- double nipple 2" AG/AG

Item details

Quantity: 1

Filling nozzle DN 80 straight, flanged: - Filling tube closure bayonet closure G2
-father coupling brass
- nut blind cap brass
- lockable with standard padlock
- Brass chain with stainless steel hook
- Double nipple 3"
- flange Ø240 mm

Item details

Quantity: 1

Manual

Please select only one component.

* mandarory field

Manual by download: After delivery you will receive an email with the links for download.

Item details

Quantity: 1

Your configuration

excl. 19% VAT , plus shipping costs (Paketversand / Sending parcels)

pcs

Description

KTD-F-A-5-A-LO
Storage tank double-walled, A (outdoor installation), 5 (5.000 ltr.), A (no coating inside)

- Material: mild steel S 235 JR
- double-walled, robust, cubic shape
- General Design Certificate: Z-38.12-312
- Volumen 100%: appr. 5.380 ltr.
- Volumen 95%: appr. 5.140 ltr.

Dimensions appr.:

- Length: 2.000 mm
- Width: 1.500 mm
- Overall width: 1.720 mm
- Height: 2.000 mm
- Overall height: 2.400 mm
- Weight: 1.490 kg

Standard equipment:

- Leackage detector static Type KÜR 5
- Dome entry DN 500
- Access steps inside the tank for revision
- 5 Connection flanges DN 160 with flange adapters
   - 5 flanges with 2 sockets, 2" each
- 4 x lifting lugs
- Floor assembly with continuous longitudinal beams and integrated forklift pockets
- Nameplate
- Burst protection 115
- Dome cover DN 600 for dome entry DN 500
   - Material: Steel S235 JR
   - incl. washers, nuts
- rubber square sealing profile 8 x 12mm, self-adhesive
- hood element
   - Frame incl. lid
   - 2 x pipe bushings 300 x 100 mm with blind plate
   - incl. screws, washers, nuts
   - gas pressure damper
   - padlock

Corrosion protection:

- inside: raw (not coated), oiled
- outside: coating L-A-3, RAL 7032

Documentation:

- Test documents in German or English, (by email or download)
- Test certificates
- General overview drawing
- Building inspectorate approval (Germany)
- Tank operating instructions
- Data Sheets / Operating Instructions for Accessories
- Certificates WHG and ISO 9001
- Additional documentation in paper form, on CD or by e-mail will be charged extra

Volume:	5000 ltr.
Place:	Outside
Thermo-Iso:	No
Earthquakes:	No
Medium:	Lubricating oil
Item weight:	1.490,00 kg