Storage tank double-walled (2.500 ltr.) Lubricating Oil Variant B

SKU: KTD-F-A-2.5-B-LO
Category: KTD-F
Manufacturers: Krampitz Maschinentank GmbH

KTD-F-A-2.5-B-LO
Storage tank double-walled, A (outdoor installation), 2.5 (2.500 ltr.), B (inside raw, thermal insulation)

- Material: steel S 235 JR
- double-walled, robust, cubic body
- General construction. Approval: Z-38.12-23
- Volume 100%: 2.670 ltr.
- Volume 95%: 2.510 ltr.

Dimensions:

- length: 2.000 mm
- Overall length: 2.180 mm
- width: 1.000 mm
- Overall width: 1,380 mm
- height: 1.500 mm
- Overall height: 1,950 mm
- Weight: 1.335 kg

Prices visible after login

Production time: 14-16 weeks
Production time: 20 - 80 Workdays (DE - int. shipments may differ)

Configure

Coating (inside) in m²

Please select only one component.

The antistatic inner coating is a corrosion protection for resistance to stress caused by media such as kerosene or other fuels with a low discharge capacity and a tendency to static charging.

without inside coating: raw oiled inside

Item details

Quantity: 1

1 m² Coating inside - bottom tray - for oily mediums

1 m² Coating inside - bottom tray - for oily mediums: Single or multi-layer color structure - bottom tray -
Corrosion protection for endurance because of the use of oily, non-aggressive mediums like lubricant oil, fuel oil, Diesel, Biodiesel, Petrol, or cooling- or lubricating water that dont tend to static charges
- Coating area: complete floor and 300 mm of the walls
- Surface preparation: Sandblasting Grit (Sa 2,5; Rz 50-65)
- Layers 2 ceramic-composite layers
- Total layer thickness NDFT: 500µm
remaining areas are raw

Item details

Quantity: 4

1 m² Coating - inside the tank - for oily mediums

1 m² Coating - inside the tank - for oily mediums: Single or multi-layer color structure - inside the tank -
Corrosion protection for endurance because of the use of oily, non-aggressive mediums like lubricant oil, fuel oil, Diesel, Biodiesel, Petrol, or cooling- or lubricating water that dont tend to static charges
- Surface preparation: Sandblasting Grit (Sa 2,5; Rz 50-65)
- Layers: 2 ceramic-composite layers
- Total layer thickness NDFT: 500µm

Item details

Quantity: 13

Sensors: Content display

optional

Level Sensor: - Resistance reed chain actuated by float magnet
- Output signal: 4-20 mA
- tank height: 1500 mm
- Reduction PE 2" to 1.1/4
- Connector plug M12

Item details

Quantity: 1

Level control module in percent: - Display in percent
- Configuration of up to 4 switching points
- In addition a 4 - 20 mA sensor is required
- The 4 - 20 mA signal can also be routed to other analysis modules
- Not required for container with PLC

Item details

Quantity: 1

Sensors: overfill protection

Please select at least 1 item.

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

Limiting value sensor Type GWG 12-K1 Indoor incl. reducer...

Limiting value sensor Type GWG 12-K1 Indoor incl. reducer 2": - only for diesel / heating oil with CE-mark
- with 1,5 m cable
- Reduction 2" x 1" (AG/IG)
- Mandatory for tanks with a volume of 1000 litres or more

Item details

Quantity: 1

Level Limiter Type: NB 220 H: Level Limiter Type: NB 220 H

- with potential free changer
- Supply: 230 V, 50 Hz
- not to be mounted directly on the tank for media such as kerosene or bioethanol

Item details

Quantity: 1

Overfill prevention Type 76 A, 200 mm, diesel, heating oil

Overfill prevention Type 76 A, 200 mm, diesel, heating oil: - Probe length 200 mm
- Diameter: 16 mm
- Connection: G 3/4" AG

Item details

Quantity: 1

Pumps

optional

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

Centrifugal pump type PK-80-016 400 V: - medium: D / HEL
- flow rate:
   - min: 11 ltr./min. at 30 mWs delivery height
   - max: 43 ltr./min at 5 mWs delivery height
- suction height: up to 9 m
- voltage: 400 V
- current: 2,0 A
- frequency: 50 Hz
- electrical power: 0,6 kW
- connection:
   - 1" on the suction side
   - 1" on the suction side
- protection: IP 44
- class F insulation
- corrosion protection:
   - two-component coating in RAL 7032

Item details

Quantity: 1

Hand wing pump K1 3/4" 17 l/min: - medium: D / HEL
- flow rate:
- max: ca. 17 ltr./min. at 10 m delivery height
- suction height: 4 m
- connection: 3/4" female thread
- Corrosion protection:
- two-component coating in RAL 7032
- incl. wooden lever
- suitable for liquids up to 80 °C

Item details

Quantity: 1

Special options

Please select at least 1 item.

additional equipment

Suction pipe 1" flanged with foot valve: - for tank height up to 2000mm
- flanged
- diameter: 160mm
- 4-hole flange with welded 1" socket
- seal

Item details

Quantity: 1

Suction pipe 2" flanged with foot valve: - foot valve
- flanged
- diameter 160mm
- 4-hole flange with welded bush 2“
- seal
- installed

Item details

Quantity: 1

Filling socket DN 50 45°: - Filling tube closure bayonet closure G2
- father coupling brass
- Cap made of oil and weather resistant plastic
- pressure waterproof up to 10 m water column
- lockable with standard padlock
- incl. green sign "fuel oil EL low sulfur" and red sign "also for fuel oil EL standard
- Angle 2", 45° male thread/male thread

Item details

Quantity: 1

Filling nozzle DN 50 straight: - Filling tube closure bayonet closure K2
-father coupling brass
- Cap made of oil and weather resistant plastic
- pressure waterproof up to 10 m water column
- lockable with standard padlock
- incl. green sign "fuel oil EL low sulfur" and red sign "also for fuel oil EL standard
- double nipple 2" AG/AG

Item details

Quantity: 1

Filling nozzle DN 80 straight, flanged: - Filling tube closure bayonet closure G2
-father coupling brass
- nut blind cap brass
- lockable with standard padlock
- Brass chain with stainless steel hook
- Double nipple 3"
- flange Ø240 mm

Item details

Quantity: 1

Manual

Please select only one component.

* mandarory field

Manual by download: After delivery you will receive an email with the links for download.

Item details

Quantity: 1

Your configuration

excl. 19% VAT , plus shipping costs (Paketversand / Sending parcels)

pcs

Description

KTD-F-A-2.5-B-LO
Storage tank double-walled, A (outdoor installation), 2.5 (2.500 ltr.), B (inside raw, thermal insulation)

- Material: steel S 235 JR
- double-walled, robust, cubic body
- General construction. Approval: Z-38.12-312
- Volume 100%: 2.670 ltr.
- Volume 95%: 2.510 ltr.

Dimensions:

- length: 2.000 mm
- Overall length: 2.180 mm
- width: 1.000 mm
- Overall width: 1,380 mm
- height: 1.500 mm
- Overall height: 1,950 mm
- Weight: 1.335 kg

Standard equipment:

- static leak detector KÜR5
- Dome entry DN 600
- Access steps in the tank for revision
- 5 block flanges for flange adapter DN 160 (AØ 240)
- 5 flange adapters with 2 sockets 2" each
- 2 heavy-duty crane eyes
- Thermal insulation of tank outside walls
- Prime coating of the steel walls before insulation is installed
- Thickness 80 mm
- Sandwich panels
- Zink sheet plated with insulation wool
- incl. 2 vent opening with weather- and insect protection at each longitudinal side

The thermal insulation removes the ladder on the tank! Attention, the roof area is not accessible!

- Base assembly with continuous longitudinal beams and integrated forklift pocket
- Nameplate
- Burst protection 115
- Roof assembly dome entrance DN 600
   - Material: Steel S235 JR
   - incl. washers, nuts
   - Sponge rubber square profile 8 x 12mm, self-adhesive
- hood element
   - Frame incl. lid
   - 2 x pipe bushings 300 x 100 mm with blind plate
   - incl. screws, washers, nuts
   - gas pressure damper
   - padlock

Corrosion protection:

- inside raw, oiled
- outside coating L-A-3, RAL 7032

Documentation:

- Test documents in German (by mail)
- test certificate
- overview drawing
- Building inspectorate approval
- Tank operating instructions
- Data Sheets / Operating Instructions for Accessories
- Certificates WHG and ISO 9001
- Additional documentation in paper form, on CD or by e-mail will be charged separately.

Volume:	2500 ltr.
Thermo-Iso:	Yes
Place:	Outside
Earthquakes:	No
Medium:	Lubricating oil
Item weight:	1.335,00 kg